10" Wheel Cribs

From $110.00
  • Safe, lightweight wheel cradles
  • 10” of lift
  • Unobstructed access underneath car
  • Split design available
  • Requires use of jack for placement
  • Set of two

Does your jack stand leave you feeling a little nervous as you wrench around under your car? Is the space too tight for comfort? Our 10” Wheel Cribs are a safer, stabler alternative to jack stands—and, given their placement beneath the tires, they give you greater maneuverability underneath the car than is possible with any jack stand.

10” Wheel Cribs give you an additional 10” of access under your car. Using them in conjunction with 67” XT Race Ramps allows your car to be level while raised. (While these are sold as a set of two, another option to achieve a level raised car is, of course, to use four cribs.)

Adjustable Wheel Cribs are a two-piece version of the standard Wheel Crib set. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted incrementally. Sold as a set of two, they can be used as two 10” cribs or four 5” cribs

These multi-purpose Wheel Cribs also can be used for an impressive car display (especially in conjunction with our Show Mirrors) and are available in custom sizes. For other lift options, see our 8” and 12” Wheel Cribs.

Product Comparison

Add to Cart
WEIGHT12 lbs. for two
WEIGHT CAPACITY1,500 lbs. per crib
Add to Cart
HEIGHT10" (5"+5" stacked)
MULTI PIECE5" + 5" stacked

Dimensions: 15”L x 12”W x 10”H (11.25” at cradle edge)
Crib weight capacity: 1,500 lbs. per crib
Total vehicle weight capacity: 6,000 lbs.
Tire diameter: 24” to 30”
Product weight: 6 lbs. per crib
Sold as: one-piece design (RR-WC-10) or two-piece design (RR-WC-10-2)
Shipping: weight of 12 lbs., box size of 16.5”L x 12.5”W x 25.25”H

• Using 10” Wheel Cribs in conjunction with 67” XT Race Ramps (RR-XT or RR-XT-2) allows your car to be level while raised.
• Requires a jack to lift the vehicle onto the wheel crib.
• Use for fluid changes (including oil and transmission), general maintenance, and detailing.
• 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
• Lightweight, yet strong and durable.
• Will not rust or transfer heat or cold.
• No-skid, no-scuff material protects your garage flooring and trunk from damage.
• Sold as a set of two.
• When buying directly from this site, they come with a 30-day satisfaction guarantee.
• Proudly made in the USA!

• Use on a level, flat surface.
• Ensure that the bottom of each crib makes full contact with a solid surface.

6 reviews for 10″ Wheel Cribs

  1. Rated 5 out of 5

    Love using these for working on the car in the garage, only wish they were wider to accommodate larger off-road tires like on Jeeps.

  2. Rated 5 out of 5

    Expensive, but awesome. I’d probably get the lower ones next time.

  3. Rated 5 out of 5

    awesome ramps, will save me a ton on oil changes, and love they are modular as well

  4. Rated 5 out of 5

    Great product. Super light and supportive.

  5. Rated 5 out of 5

    Good buy. makes working on my car in the garage easier and safer. I have 14 wxr hatch lifted it dozens of time with these havn’t seen a problem yet.

  6. Rated 5 out of 5

    These ramps are perfect! Yes, the cost a bit more, but how much is your safety worth? I have done the jack stand thing with tires and 2z4’s in ‘extra protection mode’. Then went to a free standing portable lift that ended up actually being too high or too low to do anything, and also took a full bay in my garage. Finally settled on these, and am very happy with them. Just pulled a transmission tonight with them and had MORE than enough room. Solid as a rock and very safe. Best of all, they are light as a feather and I’ll store them above my utility cabinet. Great buy!

Add a review

Your email address will not be published. Required fields are marked *

Rated 5.00 out of 5 based on 6 customer ratings
(6 customer reviews)


SKU: N/A Categories: , Tags: , ,