12" Wheel Cribs

From $125.00
  • Safe, lightweight wheel cradles
  • 12” of lift
  • Unobstructed access underneath car
  • Split design available
  • Requires use of jack for placement
  • Set of two

Does your jack stand leave you feeling a little nervous as you wrench around under your car? Is the space too tight for comfort? Our 12” Wheel Cribs are a safer, stabler alternative to jack stands—and, given their placement beneath the tires, they give you greater maneuverability underneath the car than is possible with any jack stand.

Adjustable Wheel Cribs are a two-piece version of the standard Wheel Crib set. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted incrementally. Sold as a set of two, they can be used as two 12” cribs or four 6” cribs

These multi-purpose Wheel Cribs can be used for an impressive car display (especially in conjunction with our Show Mirrors) and are available in custom sizes. For less lift, see our 10” and 8” Wheel Cribs.

Product Comparison

MODEL
PRICE
QUANTITY
LENGTH
WIDTH
HEIGHT
WEIGHT
TIRE DIAMETER
WEIGHT CAPACITY
MULTI PIECE
Add to Cart
RR-WC-12
$125.00
QUANTITY2 cribs
LENGTH15.5"
WIDTH12"
HEIGHT12"
WEIGHT14 lbs. for two
TIRE DIAMETER24" - 30"
WEIGHT CAPACITY1,500 lbs. per crib
MULTI PIECEno
Add to Cart
RR-WC-12-2
$179.00
QUANTITYsame
LENGTHsame
WIDTHsame
HEIGHT12" (6"+6" stacked)
WEIGHTsame
TIRE DIAMETERsame
WEIGHT CAPACITYsame
MULTI PIECE6" + 6" stacked

SPECIFICATIONS
Dimensions: 15.5”L x 12”W x 12”H
Crib weight capacity: 1,500 lbs. per crib
Total vehicle weight capacity: 6,000 lbs.
Tire diameter: 24” to 30”
Product weight: 7 lbs. per crib
Sold as: one-piece design (RR-WC-12) or two-piece design (RR-WC-12-2)
Shipping: weight of 14 lbs., box size of 16.5”L x 12.5”W x 29”H

• Requires a jack to lift the vehicle onto the wheel crib.
• Use for fluid changes (including oil and transmission), general maintenance, and detailing.
• 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
• Lightweight, yet strong and durable.
• Will not rust or transfer heat or cold.
• No-skid, no-scuff material protects your garage flooring and trunk from damage.
• Sold as a set of two.
• When buying directly from this site, they come with a 30-day satisfaction guarantee.
• Proudly made in the USA!

USAGE
• Use on a level, flat surface.
• Ensure that the bottom of each crib makes full contact with a solid surface.

8 reviews for 12″ Wheel Cribs

  1. Rated 5 out of 5

    Great product for suspension tuning or just showing off your ride. I’ve seen them used in auto shows for under carrage display! Love the fact that they are stackable for a higher stance of the vehicle.

  2. Rated 5 out of 5

    Superior Product. Used Many Times.

  3. Rated 5 out of 5

    These are a great idea for working on the suspension at ride-height when you don’t want jack stands in the way. (1969 GTO in my case.) They are very light weight, simple, and look real nice, too.

  4. Rated 5 out of 5

    These race ramps are AWESOME! I trust these way more than I do Jack stands and when using them crawling under my lowered car is much easier.
    Incredibly lightweight but sturdy.

  5. Rated 5 out of 5

    These wheel cribs are a safe and easy to use alternative to jack stands when you don’t need to remove the wheels for your project. In my case, I use these as four separate 5.75″ “jack stands” and feel very safe crawling under the car for maintenance and repair items.

  6. Rated 5 out of 5

    I used these ramps to do a lot of work under my ’93 Camaro because I don’t have room for a lift at my house. These put the car at a perfect height for working on things while on a creeper. Having the car on jack stands just didn’t work that well for this purpose. I also needed these to work on my suspension while it was loaded.

    The only problem I had with these was getting the car onto them reliably. I have a decently high-lift jack, but I could hardly get the wheels onto the cribs because they are so tall. I solved this by putting one of my rear tires on a spare wheel while jacking the other wheel up at the lower control arm mount right next to the tire. This gave me just enough clearance to get the one side on the crib, and then I repeated for the other side. For the front, I had to use my engine hoist on the front bumper bar to lift the car high enough for the unloaded suspension to clear the crib. This is not a problem with the product itself but it is a problem that many will face during use.

  7. Rated 5 out of 5

    I hate working under Jack Stands unless I absolutely have to, so when I saw these cribs I knew I was going to buy them. I bought these 4 pc 12′ kit because it seemed like the best deal, and the most configurable. You can either put the front or the rear 6 OR 12 inches up….or you can put the whole vehicle 6 inches up. Additionally these can serve dual purpose as the same thing as their “flat tire stoppers”. When I deploy, I plan on putting my car into storage up on these cribs to help prevent any flat spotting issues.

    Also, even reading the dimensions, i was still shocked when I got the box and realized how big these things are.

    These were my first Race Ramp products and will definitely not be the last. Great products, great quality, and made in the USA!

  8. Rated 5 out of 5

    Pros:
    – Sturdy
    – Wide platform for wheels
    – Lightweight
    – 12″ of lift provides a good amount of room to work under the car for longer projects
    – Allows suspension to be fully loaded in neutral position while raised up – important for certain chassis work
    – Made in the USA!

    Cons:
    – Expensive compared with jack stands (but still a great value)
    – Additional care needed when grinding/welding since they are made of foam not steel like jack stands/steel ramps (I place a piece of aluminum flashing or sheet metal or a fiberglass blanket around it to shield it from sparks)
    – Take up a bit more space in storage than comparable lift stands

Add a review

Your email address will not be published. Required fields are marked *

Rated 5.00 out of 5 based on 8 customer ratings
(8 customer reviews)

$125.00$179.00

SKU: N/A Categories: , Tags: , ,