40″ Sport Ramps are a no-fuss, lightweight, solid set of ramps for maintaining and displaying your sports car. The set of two ramps lifts your car a full 7” high and fits tires up to 8” wide. Their 16.7 degree angle of approach is designed for lowered, short-nose vehicles like stock Miatas, Subarus, Evos, BMWs, Triumph MGs, Jaguars, C1-C3 Corvettes, and more. (However, if you’ve lowered your car, added a splitter, changed your springs, or otherwise altered your suspension, these may not work for you – see below for additional options.) Each ramp can hold up to 1,500 lbs., for a total vehicle weight capacity of 6,000 lbs.
Need a smaller angle of approach? Sport Ramps won’t work with C5s, C6s, C7s, and Vipers, but we’ve got you covered with our 56″ or 67″ XT Race Ramps, which have a lower angle of approach for low-to-the-ground cars.
Dimensions: 40”L x 10”W x 10.75”H (7” of lift)
Angle of approach: 16.7 degrees
Ramp weight capacity: 1,500 lbs. per ramp
Total weight capacity: 6,000 lbs. per set
Maximum tire width: 8”
Product weight: 6 lbs. per ramp
Shipping: weight of 15 lbs., box size of 41”L x 12.5”W x 11”H
• Ideal for most small sports cars such as Miatas, Subarus, Evos, BMWs, Triumph MGs, Jaguars, and C1-C3 Corvettes.
• 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
• Lightweight, yet strong and durable.
• Will not rust or transfer heat or cold.
• No-skid, no-scuff material protects your garage flooring from damage.
• Comes with a carrying strap for easy transport and storage.
• Sold as a set of two.
• When buying directly from this site, they come with a 30-day satisfaction guarantee.
• Proudly made in the USA!
• Use on a level, flat surface.
• Ensure that the bottom of each ramp makes full contact with a solid surface.
• Do not exceed the recommended maximum tire width or maximum total vehicle weight capacity.
• Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace.
• When the vehicle is in place, put it in park (or in reverse gear for manual transmissions) and set the emergency brake.
• Place wheel chocks behind each tire during use.
Q. How wide of tires can these ramps hold?
A. 40″ Sport Ramps fit tires up to 8” wide and 30” in diameter.
Q. How much lift does this ramp provide?
A. 40″ Sport Ramps give you a full 7” of lift.
Q. What are these ramps made of?
A. Race Ramps are 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea. This makes them lightweight, yet strong and durable. They will not rust or transfer heat or cold. Their no-skid, no-scuff material protects your garage flooring from damage. They also will not slide, even on ice!
Q. How much weight can these ramps hold?
A. Each ramp has a weight limit of 1,500 lbs., for a total vehicle capacity of 6,000 lbs.
Q. What is the warranty on these ramps?
A. See here.
Q. Where are these made?
A. Race Ramps are proudly handmade in the USA with American-made materials.
Q. How many ramps do you get?
A. Two complete ramps.
Q. Will these work on an uneven surface?
A. No. Your surface needs to be flat and free of debris before driving up the ramps.
Q. Can these be used outdoors and/or in extreme heat or cold?
A. Race Ramps can be used indoors or outdoors as long as the surface temperature of the ramps does not exceed 150° Fahrenheit (65.56° Celsius). When using Race Ramps outside, avoid exposing them to direct sunlight for a long period of time. In very hot climates, do not store them outside, in the trunk of your car, or anywhere where the temperature can exceed 150° Fahrenheit.
Q. What type of service work can I use these for?
A. These ramps are great for general vehicle maintenance including oil changes, other fluid changes (coolant, transmission, differential etc.), under vehicle inspections, body work, waxing, polishing, and detailing.