Flatbed HD Tow Ramps

From $227.00
  • Easily extend rollback for faster, safer loading
  • Decrease angle of approach to as little as 4 degrees
  • Total vehicle weight capacity of 10,000 lbs.
  • Set of two

Tow like a pro with our HD Tow Ramps. You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it’s safe in your hands, too. The 1″ x 5″ notch in these Tow Ramps enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car.

5″ HD Tow Ramps give the vehicle 5″ of lift over a 4 degree angle of approach. They are 67″ long and come either 10” wide (for tires up to 8” wide) or 14” wide (for tires up to 12” wide). The ramps weigh less than 15 lbs. each and come with a carrying strap for easy transport and storage. Both sizes feature our heavy duty “HD” design: Each ramp can hold up to 2,500 lbs., for a total vehicle weight capacity of 10,000 lbs.

7″ HD Tow Ramps give the vehicle 7″ of lift over a 5.2 degree angle of approach. They are 74″ long and 10” wide (for tires up to 8” wide). These come in a one-piece or two-piece design. The two-piece version is designed such that you may be able to use only the initial section of the ramp at times – you may not always need the full 74” of length (you can also purchase just this 4.5″ high section as BB-TT-7-10-IS). These also come in HD, for a total vehicle weight capacity of 10,000 lbs. If you need a lower angle of approach, you can pair either set of the 7″ HD Tow Ramps with this XTender.

All of our Tow Ramps are 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea. This patented process results in a product that is extremely lightweight, yet strong and durable. The ramps will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramps to be used on gravel or other rough surfaces that you may encounter along the side of the road.

We are on a mission to “ban the board” – use our Tow Ramps to load cars quickly and, most importantly, safely . . . for your sake and the sake of the car!

When buying directly from this site, the set of two ramps comes with a 30-day satisfaction guarantee. Proudly handmade in the USA!

Product Comparison

MODEL
PRICE
QUANTITY
LENGTH
WIDTH
HEIGHT
WEIGHT
APPROACH ANGLE
WEIGHT CAPACITY
MULTI PIECE
Add to Cart
BT-TT-5-10
$318.00
QUANTITY2 ramps
LENGTH67"
WIDTH10"
HEIGHT5"
WEIGHT10 lbs. per ramp
APPROACH ANGLE4 degrees
WEIGHT CAPACITY2,500 lbs. per ramp
MULTI PIECEno
Add to Cart
BT-TT-7-10
$357.00
QUANTITYsame
LENGTH74"
WIDTHsame
HEIGHT7"
WEIGHT15 lbs. per ramp
APPROACH ANGLE5.2 degrees
WEIGHT CAPACITYsame
MULTI PIECEsame
Add to Cart
BT-TT-5-14
$391.00
QUANTITYsame
LENGTH67"
WIDTH14"
HEIGHT5"
WEIGHTsame
APPROACH ANGLE4 degrees
WEIGHT CAPACITYsame
MULTI PIECEsame
Add to Cart
BT-TT-7-10-2
$391.00
QUANTITYsame
LENGTH74"
WIDTH10"
HEIGHT7"
WEIGHT19 lbs. per ramp
APPROACH ANGLE5.2 degrees
WEIGHT CAPACITYsame
MULTI PIECEyes
Add to Cart
BT-TT-7-10-IS
$227.00
QUANTITYsame
LENGTH42.3"
WIDTHsame
HEIGHT4.5"
WEIGHT10 lbs. per ramp
APPROACH ANGLEsame
WEIGHT CAPACITYsame
MULTI PIECEno

1 review for Flatbed HD Tow Ramps

  1. Rated 5 out of 5

    I purchased this to extend the length and thus lesson the angle of our existing 8′ ramps used to load cars onto our 24″ high flat bed trailer. With this ramps we now have almost 14 foot to reach 24″ and this allows us to load/unload vehicles with at least 4″ of ground clearance with no problems. They are vey sturdy and because of the “finish” will not move. The only suggestion I would have would be to have a handle on the side to help facilitate placement.

Add a review

Your email address will not be published. Required fields are marked *

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$227.00$391.00

SKU: N/A Category: Tags: , ,

You may also like…