Trailer-Mates

From $187.00
  • Reach tie downs in trailer
  • Keep vehicle from rolling during transport
  • Clear wheel well with car door
  • Front and back variations available

Trailer-Mates eliminate the hassle and stress of getting your low-ground-clearance vehicle safely tied down in the trailer. When a car is parked on the Mates, an additional 3” of ground clearance is created – giving you more room to reach the vehicle’s tie-down points. Mates may give you the clearance needed to open the car door and clear the wheel well on the trailer, too. The front Trailer-Mates – available in three versions, each with a different angle of approach – all feature concave depressions that help keep the vehicle from rolling during transport. The rear Trailer-Mates are designed to simply drive right over, making placement a snap. Each ramp can hold up to 1,500 lbs., for a total vehicle weight capacity of 6,000 lbs.

Product Comparison

MODEL
PRICE
QUANTITY
LENGTH
WIDTH
HEIGHT
WEIGHT
APPROACH ANGLE
WEIGHT CAPACITY
Add to Cart
RR-TM-FRT
$198.00
QUANTITY2 front
LENGTH36"
WIDTH14"
HEIGHT5.5"(3" of lift)
WEIGHT7.5 lbs. per ramp
APPROACH ANGLE11.9 degrees
WEIGHT CAPACITY1,500 lbs. per ramp
Add to Cart
RR-TM-REAR
$187.00
QUANTITY2 rear
LENGTH32.75"
WIDTHsame
HEIGHT3"
WEIGHT5 lbs. per ramp
APPROACH ANGLE10.9 degrees
WEIGHT CAPACITYsame
Add to Cart
RR-TM-F+R
$366.00
QUANTITY2 front + 2 rear
LENGTHsee previous two columns
WIDTHN/A
HEIGHTN/A
WEIGHTN/A
APPROACH ANGLEN/A
WEIGHT CAPACITYsame
Add to Cart
RR-TM-FRT-3
$198.00
QUANTITY2 front
LENGTH40"
WIDTHsame
HEIGHT3"
WEIGHT6 lbs. per ramp
APPROACH ANGLE7 degrees
WEIGHT CAPACITYsame
Add to Cart
RR-TM-FRT-2
$198.00
QUANTITYsame
LENGTH35"
WIDTHsame
HEIGHT2"
WEIGHTsame
APPROACH ANGLE6.4 degrees
WEIGHT CAPACITYsame

SPECIFICATIONS
Dimensions: See matrix, varies by version
Angle of approach: See matrix, varies by version
Ramp weight capacity: 1,500 lbs. per ramp
Total vehicle weight capacity: 6,000 lbs.
Maximum tire width: 12”
Product weight: See matrix, varies by version
Sold as: rear set of two ramps (RR-TM-REAR), front set of two ramps with 11.9 degree angle of approach (RR-TM-FRT), front set of two ramps with 7 degree angle of approach (RR-TM-FRT-3), front set of two ramps with 6.4 degree angle of approach (RR-TM-FRT-2), or pair of two front and two rear ramps (RR-TM-F+R).
Shipping:
RR-TM-FRT weight of 14 lbs., box size of 42.5”L x 14.75”W x 6.75”H
RR-TM-REAR weight of 11 lbs., box size of 33.5”L x 14.25”W x 8.5”H
RR-TM-FRT-3 weight of 16 lbs., box size of 42.5”L x 14.25”W x 6.75”H
RR-TM-FRT-2 weight of 14 lbs., box size of 36”L x 14.25”W x 6.75”H

• 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
• Lightweight, yet strong and durable.
• Will not rust or transfer heat or cold.
• No-skid, no-scuff material protects your garage flooring from damage.
• When buying directly from this site, they come with a 30-day satisfaction guarantee.
• Proudly made in the USA!

USAGE
• Use on a level, flat surface.
• Ensure that the bottom of each ramp makes full contact with a solid surface.
• Do not exceed the recommended maximum tire width or maximum total vehicle weight capacity.
• Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace.
• When the vehicle is in place, put it in park (or in reverse gear for manual transmissions) and set the emergency brake.

2 reviews for Trailer-Mates

  1. Rated 5 out of 5

    Works great, combined with the rear wheel set, just enough lift for the door on my 2014 Corvette to clear the wheel well in my enclosed trailer.

  2. Rated 5 out of 5

    These go with my ramps. They are strong, lightweight, and the perfect size. Now I can open the door on my corvette while it is on the trailer.

Add a review

Your email address will not be published. Required fields are marked *

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

$187.00$366.00

SKU: N/A Category: Tags: ,